The Theragun Office Purchase That Took Six Weeks (And What It Taught Me About Small Orders)

2026-11-17 / Greta Lindholm

My to-do list looked unremarkable: find Miele dishwasher parts for the staff kitchenette, get a Yale smart lock installed, and track down someone to replace the igniter on the gas stove. Plus, a request from HR: "Can we get a few Theraguns for the break room?"

Managing the office for a 70-person company means exactly this. Roughly $350,000 a year in purchasing spread across more than 15 vendors, covering everything from office supplies to facilities repairs.

The Theragun part seemed like the easiest item on the list. A massage gun is a small device. Pick a model, place an order, done in a week or two. At least that's what I assumed.

Six weeks later, the Miele parts had arrived. The Yale lock was installed. The stove igniter got replaced (the repair tech charged me $180 — a different story). The Theraguns? Zero units purchased.

Here's how a simple equipment request turned into the most time-consuming purchase of my quarter.

Why This Was Harder Than It Should Have Been

The product itself is fine. Theragun is professional-grade percussive therapy equipment — not the cheap imitations you see on marketplace sites. The problem was the buying process: when you're a small business buyer trying to order a handful of units for internal use, you fall into a gap between "retail consumer" and "real corporate account."

Let me count the ways.

Problem One: Neither Channel Fits

Theragun is widely sold through retail channels — you can order a Mini on Amazon today and have it tomorrow. But company reimbursement requires invoices, purchase orders, compliance documentation. Retail channels don't offer any of that.

So I tried the enterprise purchasing route, assuming it would be smoother. Turns out enterprise channels are built for volume orders. When I inquired about "five to ten units," the response was polite but cold.

One sales rep was straight with me: minimum 20 units before they'd issue a formal quote.

For a small office wanting to test a batch before committing further, that's a non-starter.

Problem Two: The theragun manual Doesn't Cover This

I spent hours reading reviews — the theragun mini 3rd gen review 2025 and various comparison articles. All positive. But I later realized those reviews are written for individual consumers.

Nobody answered the questions that mattered for an office: how do you manage hygiene when multiple people share the device? How are the attachment heads allocated? What's the charging and storage setup?

I dug through the theragun manual and found the same thing — it's written for personal use. No section on shared-office scenarios.

That was a headache. HR had already started promoting the perk to staff, and I couldn't even put together a basic internal usage guide.

Problem Three: Same Words, Different Meanings

I told one sales rep we wanted this for "team use." They heard "team gifts" — one-time, gift-wrapped. What I actually needed was a set configuration: shared accessories, charging storage, cleaning protocols.

That miscommunication cost me nearly a week.

(Note to self: next time say "office deployment," not "team use." Lesson learned.)

Problem Four: Nobody Owns the Last Mile

Once the devices arrived, there was another problem no one had prepared for: how do employees actually use them?

HR announced the new perk in the break room, but nobody explained how to use the equipment, how long each person could use it, or which attachment head was for what. The theragun manual had basic information, but it was scattered. Not nearly enough to handle 15 curious colleagues asking questions.

(Mental note: equipment purchasing is never just purchasing. The post-delivery experience is also on me.)

What Those Six Weeks Actually Cost Me

Let's start with time. Eleven inquiry emails. Nine return calls. Four supplier portals requiring me to fill out forms — including one that asked me to prove our company was "large enough" for bulk pricing. I still don't understand the logic behind that one.

Then there's credibility. HR checked in three times: "Are the massage guns here yet? Everyone's excited." By the third time, my reputation was running on fumes.

There's also a cost I didn't factor in initially: employees had already heard about the perk and were anticipating it. The delay wasn't just a logistics problem — it became a morale problem.

Budget almost went sideways too. I initially considered the Theragun Pro models because of the higher specs. Then someone reminded me: for shared break-room equipment, durability and ease of use matter more than premium features. I almost overspent on a model employees might not use correctly — just because my instinct said "expensive equals better."

The hidden cost was that this "small project" pulled my attention away from real work. The Miele order and the lock installation both got done, but I had no time for follow-up vendor evaluations. Small orders get labeled "unimportant" — but their delays ripple through the entire office's operating rhythm.

How It Finally Got Resolved (Way Shorter Than the Problem)

The solution was unglamorous. I reached out directly to Therabody's enterprise sales team and explained the situation: a 70-person company, trial run of five units, possible expansion later. They matched me with an account rep who understood corporate purchasing. Invoicing, payment terms, first order — all handled.

Our approach:

  • Start with Theragun Mini 3rd gen. Lower unit cost, portable, easier to pilot.
  • Buy direct from the brand, not a third-party reseller. Not cheaper, but compliant with our procurement process.
  • Build an internal one-pager based on the theragun manual. One page: basic usage, time limits per person, attachment head cleaning procedure.
  • Have HR host a quick demo session. We brought in a friend who's a physical therapist to walk through it. Staff adoption was far higher than just reading a manual.

Six weeks later, the devices were finally in the break room. Employee feedback has been positive. But this should not have taken six weeks.

Honestly: if I had known from the start that small-batch equipment purchases get stuck in the gap between retail and enterprise channels, I could have saved three weeks. The Theragun product is excellent. The problem is that nobody serves the small business buyer who wants "a few units for the team."

I spoke with a fellow office manager about this later, and she said something memorable: "I'd rather a supplier tell me 'we don't do small orders' than leave me waiting three weeks without a clear answer." That's the real issue — not price, not product. Small orders just aren't taken seriously.

Per FTC guidelines (ftc.gov), health devices making wellness claims need reliable scientific substantiation. That's a good standard — it separates serious brands from the ones making exaggerated promises. But no regulation covers the procurement process. And the process is what keeps office administrators up at night.

(Next time a similar request comes in, my first step will be calling the brand's enterprise team directly. I won't try the retail channel as a test run again.)

Greta Lindholm
Greta Lindholm

Greta Lindholm is a household refrigeration analyst covering French-door, side-by-side, top- and bottom-mount refrigerators, mini fridges, beverage coolers, chest freezers, and upright freezers. She applies IEC 62552 and IEC 60335-2-24 while comparing energy consumption, usable volume, pull-down time, compartment temperature stability, freezing capacity, noise, door-seal leakage, refrigerant charge, and ambient-temperature performance. Her guides help importers, distributors, private-label teams, and appliance engineers select platforms around climate class, storage mix, efficiency labels, cabinet dimensions, service access, shipping density, and warranty exposure.

Previous: Brita Filter Lifespan & 4 Other Home Safety Questions, Answered StraightNext: Brita Filtered Water, Small Portable Heaters, and Gas Stoves Without Power: A 4-Scenario Guide From Someone Who Learned the Hard Way

Comment or sourcing question